Body Armour Vest (with MOLLE System) bulletproof and stabproof vest, China Body Armour Vest (with MOLLE System) bulletproof and stabproof vest Manufacturers, Suppliers, Factory - Jiangsu Kelin Police Equipment Manufacturing Co., Ltd.

NO	Item	Description
1	Design of the VEST	Body Armour Vest(with MOLLE System)Protect Torso, Front , and Back, Side
2	BULLETPROOF LEVEL	NIJ standard 0101.04 level II (9 mm; 357 Magnum)
3	STABPROOF LEVEL	NIJ standard 0115.00 level 1.
4	BULLET/STABPROOF AREA	>0.26m2 (M), >0.3m2 (L), (Font and back, side)
5	Fire Retardant	The whole Vest including any accessories e.g. Straps etc. should be fire retardant., i.e. protective clothing against limited flame spread materials.
6	Bulletproof / Stab proof Material	Aramid (e.g. Kevlar) UD
7	Stitching standard	Military specifications, Type E Thread (or equivalent)
8	Vest FABRIC	500D Cordura or 600D Nylon for the vest. abrasion-resistant, dirt-resistant, quick drying
9	COLOR	Black, nonreflective.
10	MOLLE Webbing.	5 rows of horizontal MOLLE webbing to attach pouches. (each vest to hold 4 pouches)1 pouch for Fire Extinguisher1 pouch for Hydration Pack2 pouches for 40mm CS Round.
11	Resistance Capability(If applicable):	Velcro: >>7.2Ncm2Buckle: >200NJoints: >300N
12	Sizes	comes with S, M, and L.

VEST - Test report / Certifications.
Protection of (5) Torso

Anti-stab Testing (Stab Proof) :

NIJ standard 0115.00 level 1 (knife, Stab), GA 420-2008 (stab) or GA68-2008 (Stab).

Able to withstand dagger stabbing to any point of the chest back and groin. Under 2000N static pressure for 1 minute ( >= 20J. able to absorb more than 75% hit and protection for more than 35J stab energy )

Ballistics (Bullet Proof).

Meet NIJ level 2 as specified in NIJ standard 0101.04.

Burning Resistance – The vest can resist burning.

To be flame resistant when tested according to ( DIN EN ISO 6941 and DIN 53438 part 1-3 ) or GA420-2008

Chemical Resistance.

Show NO signs of physical degradation when exposed to 2-chlorobenzalmalonoitrile CS gas, Pelargonic Acid Vanillyl amid (PAVA) and petroleum.

The exterior components are chemical resistant and will not drip off when exposed to motolov-cocktail.

Pouches

Specifications

To fit on the Outer Layer Vest, which has 5 rows of horizontal MOLLE webbing. (each vest to hold 4 pouches)

pouch for Fire Extinguisher

pouch for Hydration Pack

pouches for 40mm CS Round .

Dimensions of the Pouches. (to be confirmed)

for Fire Extinguisher (280mm x 60mm x 60mm)

for Hydration Pack (300mm x 190mm x 80mm)

for 40mm CS Round (157mm x 80mm x 50mm,)

Flame / fire Resistance material

Standards for the Protective Gear (Anti Riot Suit)
Stab Proof / Resistance. They must meet HOSDB Body Armour standard of Knife Resistance (KR) + and Spike Resistance (SP) level 1 KR1+SP1 or equivalent (e.g. NIJ 0115.00 Level 1)

NIJ Standard–0101.04 Level 2.
Type II (9 mm; 357 Magnum)
This armor protects against 9 mm Full Metal Jacketed Round Nose (FMJ RN) bullets, with nominal masses of 8.0 g (124 gr) impacting at a minimum velocity of 358 m/s (1175 ft/s) or less, and 357 Magnum Jacketed Soft Point (JSP) bullets, with nominal masses of 10.2 g (158 gr) impacting at a minimum velocity of 427 m/s (1400 ft/s) or less. It also provides protection against the threats mentioned in sections 2.1 and 2.2.